Pioneer BDP-95FD Operating Instructions Manual page 51

Problem
Disc containing PC files won't play.
No picture or High Definition video output
when watching a BD.
Image is blurred when you begin playback
of a disc.
Tracks/files are repeated during random
play.
SlideShows do not play.
Images no longer displayed when you
change the 24p Direct Out setting to On.
CDs cannot be copied on other external
components.
HDMI troubleshooting
Problem
No HDMI video output. (A connected
HDMI component doesn't work with this
player.)
Colors are too rich or too weak, or black is
too deep or appears to 'float'.
No HDMI audio output.
Remedy
• Make sure the disc is compatible with this player (see Disc/content format playback compatibility on
page 9).
• This player is compatible with multi-border discs, but only plays the first border.
• Check that the file complies to one of the supported formats, bit rates or profiles (see File
compatibility on page 9). Also check that the file is not damaged.
• If the message 'Cannot play this format' is displayed when you try to play PC files, check the file
formats.
• This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc
( )
Navigator with a lock icon
• For copy-protection purposes, composite, S-Video and component video output may not possible.
See Connecting for HDMI output on page 13 to connect using HDMI.
• Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.
• Because tracks/files are selected entirely at random, same tracks/files may be played in quick
succession. For example, 'Track 1' may be followed by 'Track 5,' only to have 'Track 1' play again next.
This is not a malfunction.
• If you have selected a single file and select Slideshow from the Photo Options menu, then only
that single file is played back. To play a slideshow you must select All Photos from the browse
menu.
• Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 14).
• The audio signals of a CD output at the jacks of this player are protected from copying and cannot
be copied on other external components.
• To copy the audio signals recorded on a CD, connect your external components to the AUDIO OUT
(2ch) jacks of this player.
Remedy
• This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).
Depending on the component you have connected, unreliable signal transfers may result.
• If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with
High-bandwidth Digital Content Protection (HDCP).
• If the front panel HDMI indicator is unlit then:
– Make sure that you've selected this player as the HDMI input in the settings for the component
you're using. You may need to refer to the instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable isn't damaged.
• If the front panel HDMI indicator is lit:
– Depending on your display, some of the settings may result in the picture disappearing. In this case,
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video
resolution on page 14).
Depending on the HDMI cable being used, 1080p output may not appear correctly.
•
• Use a different HDMI Color Space setting (page 41).
• If you have connected to an HDCP-compatible DVI component, there won't be any audio output
from the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).
• Verify that the connected HDMI device is compatible with Dolby TrueHD or Dolby Digital Plus (i.e. if
bitstream output is allowed). If the HDMI device is not compatible, the audio will be converted into
Dolby Digital or Linear PCM.
.
09
51
En