Safety Information; Power Source - CRISTAL MNBX4 Instruction Manual

Safety information

Important - Please read these instructions fully before
installing or operating

Power source

• The appliance can be connected to a 220-240 volt 50/60Hz AC supply by means
of a three pin socket (mains adaptor sold separately).
• When using the 12V in-car adaptor the compact fridge should not be left
connected for long periods of time when the engine is not running.
• DO NOT connect directly to a 24V lighter socket of a heavy duty vehicle.
• Unplug this apparatus during lightning storms or when unused for long periods
of time - to prevent damage to this product.
• Opening or removing covers may expose you to dangerous voltages or other
hazards.
• To prevent risk of fire or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles.
• Use suitable power sources - Plug the product into a suitable power source, as
described in the operating instructions or as marked on the product.
• The supply voltage should be the same as that indicated in the technical
specifications and the appliance rating plate.
• In order to disconnect the apparatus from the mains completely switch off the
outlet and remove the mains plug completely.
• Do not bend, stretch or pull the supply cable in order to avoid electric shock.
• When installed, the power socket must be within easy reach.
Moisture and water
• Do not use this apparatus near water or moisture.
• Do not use this product near a bathtub, wash-bowl, kitchen sink, and laundry tub, in a
wet basement, near a swimming pool, outdoors, or anywhere else that water or moisture
is present.
2