Code Identification; Reset To Factory Settings - GE 33711 Instruction Manual

D
exit
input
Using Your Remote
aux

Code Identification

cbl dvd
input
setup
dvd aux
tv cbl
exit
D
menu setup
A B C D
B C
tv cbl
list exit
dvd
enter
menu
A B
exit
B C enter
input
enter
aux

Reset to Factory Settings

list
setup
D
enter
exit
input
aux
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
setup
Release the SETUP button. The red
light will remain on.
D
2. Press and release the desired device
dvd
button (TV, cble, dvd, aux) you would
input
like the code for.
aux
3. Press and release the ENTER button.
4. Press and release the #1 button.
Count the number of times the
remote light flashes. This is the
C
setup
number corresponding to the first
digit of the code. Repeat the process
D
exit
by pressing the #2, #3 and #4
buttons for the remaining digits.
5. Press and release the ENTER button
to exit this mode.
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
exit
Release the SETUP button. The red
light will remain on.
2. Press and release the MUTE button.
3. Press and release the number #0
button. The red indicator light will
enter
flash twice.
enter
enter
input
aux
setup
D
exit
11