Handling Precautions - LG LGL24 Basic Manual

Isai xx
Table of Contents

Advertisement

■ The materials of each part of the Stereo earphone with
Microphone (sample) is shown below.
Part
Material
Ear pad
Silicon
Earphone exterior
PC resin
Logo part
Aluminum
Microphone button
PC resin
Microphone button
PC resin
case
Plug exterior
Rubber
Cable
Rubber
Plug
Ni (YR3541-2034)

Handling Precautions

Surface treatment
These precautions are provided to ensure that
performance can be fully demonstrated.
-
Thoroughly read these precautions to ensure correct use.
UV coating
Anode treatment
■ Precautions common to the main unit, built-in battery,
-
charging equipment, au Nano IC Card (LTE), peripheral
-
devices
● Do not apply excessive force to the product during use. Be sure
-
not to put the product into a tightly packed bag or place a heavy
-
object on the product in a bag. Sitting on the product in your
pocket might damage the display or internal circuit board resulting
Nickel plating
in a malfunction.
Keeping an external device connected to the external connector
or earphone jack might damage the connector resulting in a
malfunction. Such damage and malfunction are not covered by the
warranty, even if there is no external damage.
● To ensure waterproof property (equivalent to IPX5 and IPX7) of
this product, use the product with the cover tightly closed.
Note that the waterproof property is not guaranteed in every usage
condition. Do not allow water to get inside the product or splash
water on charging equipment, or optional accessories. Do not
attach/remove the back cover in the rain or with water drops on
the surface of the product. Doing so might cause water intrusion
resulting in internal corrosion.
Malfunctions determined to be caused by water intrusion are not
covered by the warranty.
● Do not use the product in extremely hot, cold, or humid places.
(Use within an ambient temperature range of 5℃ to 35℃ and
humidity range of 35% to 85%.)
● Do not use in places subject to lots of dust or vibration.
● Clean the connection terminals with dry cotton swabs, etc. every
now and then. Soiled terminals might cause poor connection.
Do not exert a strong force to clean the connection terminals to
prevent deformation.
23

Advertisement

Table of Contents
loading

Table of Contents