Adjustment - JVC TH-S3 Service Manual

4.1 Special mode
4.1.1 Outline
The contents in the special mode of operation, and the definition of a key (remote controller or main unit)
4.1.2 Special mode
(1) TRAYLOCK
A loader mechanism's tray lock is carried out.
In the tray lock function ON state, EJECT processing is not performed to the EJECT key.
And, a LOCK display is performed at this time. (___LOCKED___/_UNLOCKED_)
When it turns off a tray lock function, STOP and EJECT KEY are pushed simultaneously again.
Back up ON/OFF of a tray lock.
(2) DVD TEST MODE
It goes into the TEST mode of DVD.
Refer to the DVD specifications for the contents performed in TEST mode.
DVD test mode is canceled by except DVD source, and POWER OFF.
It is referring to the "4.2 DVD test mode" for details.
(3) DVD INITIALIZE
DVD is initialized.
The RDS segment of FL is made to turn on at the time of an initialization end.
It is referring to the "4.2 DVD test mode" for details.
(4) DVD region check mode
A region No. display is performed to FL by the toggle in DVD test mode.
It is referring to the "4.2 DVD test mode" for details.
1-22 (No.MB187)
SECTION 4

ADJUSTMENT

Press the "PAUSE" and "EJECT" keys
on the remote controller at standby.
A tray lock is completed.
Insert the power cord in an outlet while
pressing the "PLAY" and "PAUSE" keys
on the main unit simultaneously.
A main unit entered in the
DVD TEST MODE.
Press the "PAUSE" key on the remote
controller during the DVD test mode.
DVD initialization is completed