Advertisement

ACC-900 Quick Guide
The
master code
factory default
for readers
is
123456

Advertisement

Table of Contents
loading

Summary of Contents for Eclipse ACC-900

  • Page 1 ACC-900 Quick Guide master code factory default for readers 123456...
  • Page 2 SET DOOR SET DOOR RELAY TIME RELAY TIME AFTER PRESSING POUND PRESENT THE CARD / TAG AFTER PRESSING POUND PRESENT THE CARD / TAG...
  • Page 3 ADD A SERIES ADD A SERIES OF CARDS OF CARDS TO USE WITH CARD TO USE WITH CARD USER CODE USER CODE TO USE WITH CARD TO USE WITH CARD USER CODE USER CODE...
  • Page 7 Example: If you want the option Auto-relock disabled you would chose The value for this option would then be 0 also. If you would like to enable it the you would chose 1 and the value would be 002. You would then proceed to add all the other values...
  • Page 8 Maglocks Maglocks & N/C & N/C Doorstrikes Doorstrikes...
  • Page 9 Maglock Installation...
  • Page 10 Bolt Lock Installation...
  • Page 11 Door Strike Installation...
  • Page 12 Magnetic Door Contacts & Alarm...
  • Page 13 Networking Install CAT5 CAT5 Crossover Crossover Cable Cable...

Table of Contents