Switch The Phone On And Off; Access Codes - Nokia 6650 User Manual

■

Switch the phone on and off

Press and hold the power/end key.
If the phone asks for a PIN code, enter the PIN code, and select OK.
If the phone asks for the lock code, enter the lock code, and select OK.
The factory setting for the lock code is 12345.
Set time and date
To set the correct time zone, time, and date, select the country you are
presently in, then enter the local time and date.
Some networks have automatic updates of time and date. Contact your
service provider for information on this feature.
■

Access codes

Select > Settings > Config. > General > Security > Phone and
SmartChip to set how your phone uses the access codes.
Lock code
The lock code (5 digits) helps to lock your phone. The preset code is
12345. Change the code, and set the phone to request the code.
When the device is locked, calls may be possible to the official emergency
number programed into your device.
PIN codes
The personal identification number (PIN) code or the universal personal
identification number (UPIN) code (4 to 8 digits) help to protect your
SmartChip card. The (U)PIN code is usually supplied with the SmartChip
card. Set the phone to request the code each time the phone is switched
on.
The PIN2 code may be supplied with the SmartChip card and is required
for some functions.
The module PIN is required to access the information in the security
module. The signing PIN is required for the digital signature. The module
PIN and the signing PIN are supplied with the SmartChip card if the
SmartChip card has a security module in it.
Model 6650d-1bH
02 April 2008
G e t s t a r t e d
15