Windows 8
Step 1: Click the icon
Step 2: Select your wireless network from the list, click Connect and
then follow onscreen instructions.
Tip
If you cannot find your wireless network
from the list, ensure the Airplane Mode is
not enabled on your PC.
Step 3: When your wireless network is connected successfully, the
following screen will appear.
3.3 Via WPS
Or you can connect to an AP or wireless router via this wireless adapter (STA Mode) by WPS. WPS setting
supports PBC and PIN code modes. The operations below are for references.
By WPS Button
(W311M and W311Ma are equipped with a WPS button, W311MI is not.)
Process
1. Enable the WPS feature of the remote AP or router and press the WPS button on it.
2. In two minutes, press the WPS button on the wireless adapter.
3. Wait the wireless adapter for getting an IP address and then you can access the Internet.
on the bottom right corner of your desktop.
(Available for W311M/W311Ma)
10