Table of Contents
Advertisement
Main unit
•
Power supply:
•
Model (Philips branded
AC power adapter):
DYS902-190473W
•
Input: 100-240 V~, 50/60 Hz
1.5 A
•
Output: 19V
•
Standby without clock display:
≤ 0.5 W
•
Standby with clock display: ≤ 1 W
•
Dimensions (W x H x D):
1058 x 52 x 120 mm
•
Weight: 3.65 kg
•
Built-in speakers
•
6 x silk tweeter (1'', 3 ohm)
•
2 x silk tweeter (0.8'', 8 ohm)
•
4 x racetrack woofer speaker
(3.5'' x 1'' , 16 ohm )
•
Centre channel: 2 x racetrack
full-range speaker ( 3.5'' x 1'',
16 ohm)
•
Front/surround channel: 4 x
racetrack woofer speaker ( 3.5'' x
1'', 8 ohm)
Subwoofer
•
Power supply: 110-127V/220-
240 V~, 50/60 Hz
•
Power consumption: 60 W
•
Standby power consumption:
≤ 0.5 W
•
Impedance: 3 ohm
•
Speaker drivers: 1 x 8'' subwoofer
•
Dimensions (W x H x D):
240 x 510 x 302 mm
•
Weight: 8.9 kg
Remote control batteries
•
2 x AAA-R03-1.5 V
B8_37_CD-UM_EN.indd 19
, 4.73A
8 Trouble
shooting
Warning
•
Risk of electric shock. Never remove the
casing of the product.
To keep the warranty valid, never try to
repair the product yourself.
If you have problems using this product,
check the following points before you
request service. If you still have a problem,
get support at www.philips.com/support.
Main unit
The buttons on this product do not work.
•
Disconnect this product from the
power supply for a few minutes, then
reconnect.
Sound
No sound from the speakers of this
product.
•
Connect the audio cable from this
product to your TV or other devices.
However, you do not need a separate
audio connection when:
•
the product and TV are connected
through HDMI ARC connection, or
•
a device is connected to the HDMI
IN connector on this product.
•
Reset this product to its factory
settings.
•
On the remote control, select the
correct audio input.
•
Make sure that this product is not
muted.
EN
19
3/03/2017 11:37:45 AM
Advertisement
Table of Contents
