Connecting The Unit; Step 3; Connecting To Video Equipment Or A Computer - Sony VPL-VZ1000 Quick Reference Manual

Hide thumbs Also See for VPL-VZ1000:

Table of Contents

Available languages

When making connections, be sure to do the following:

• Turn off all equipment before making any connections.

• Use the proper cables for each connection.

• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When

pulling out a cable, be sure to pull it out from the plug, not the cable itself.

• Refer to the operating instructions of the connected equipment.

Right side of the unit

Rear side of the unit

: Video signal flow

Notes

• Use a High Speed or Premium High Speed HDMI cable on which the cable type logo is specified. With a standard HDMI cable, images of

1080p, DeepColor, 3D video and 4K video may not be displayed properly.

• When you want to display a picture in a more detailed HDMI format, use the "Premium High Speed" type.

• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI input of the unit and the v mark on the

connector of the cable are faced at each other.

• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the settings of the connected equipment.

• If you use a notebook computer and set the computer to output the signal to both the computer's display and an external monitor, the picture

may not appear on the unit properly. Set your computer to output the signal to only the external monitor. For settings of the computer, consult

with the manufacturer of the computer.

Connecting the Unit

to HDMI input

Equipment with HDMI

output connectors

HDMI cable (not supplied)

Computer

AV amplifier

Speakers

to HDMI

output

Table of Contents

Table of Contents