Seagate ST251R Product Manual page 16

1.9 DC POWER SPECIFICATIONS
Power may be applied or removed in any sequence without loss of
data or damage to the drive.
Typical seeking/nonseeking current and power specifications assume
nominal voltages applied, 25°C ambient temperature, sea level and
spindle rotating.
Typical seek currents are measured on a buffered one-third stroke
seek followed by two revolutions of non-seek time.
Maximum (3 sigma max.) seeking/nonseeking current specifications
assume 10° C ambient temperature, 5.25 VDC and 12.6 VDC applied,
sea level and spindle rotating.
Maximum seek currents are measured on repetitive 3-track buffered
seeks with
a
one-half spindle rotation between each seek.
+12
VDC
Voltage Tolerance (inc. ripple):
Max. Current at Power-Up:
Seeking Current:
Nonseeking Current:
+5VDC
Voltage Tolerance (inc. ripple):
Seeking Current:
Nonseeking Current:
POWER
Seeking:
Nonseeking:
±5% both seek and nonseek con-
ditions
2.0 Amps
1.8 Amps max. Peak
1.1 Amps max. RMS
0.7 Amps typo RMS
0.7 Amps max. RMS
0.5 Amps typo RMS
±5% both seek and nonseek con-
ditions
1.4 Amps max. Peak
1.1 Amps max. RMS
0.9 Amps typo RMS
1.3 Amps max. RMS
1.0 Amps typo RMS
13 Watts typo
11 Watts typo
1-8 ST2511251R1277R Product Manual, Rev.A