LG 47LG70 Manual page 78

09. C C olor ( ( Command: k k i i )
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. T T int ( ( Command: k k j j )
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. S S harpness ( ( Command: k k k k )
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
12. O O SD S S elect ( ( Command: k k l l )
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. R R emote C C ontrol L L ock M M ode ( ( Command: k k m m )
To lock the remote control and the front panel controls
on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you're not using the remote control and front panel
controls on the TV, use this mode. When main power is
on/off, remote control lock is released.
Data 01: OSD on
Data 01: Lock on
14. T T reble ( ( Command: k k r r )
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass ( ( Command: k k s s )
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. B B alance ( ( Command: k k t t )
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to 'Real data mapping 1' as shown below.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. C C olor T T emperature ( ( Command: k k u u )
To adjust color temperature.
You can also adjust color temperature in the PICTURE menu.
Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
*Real data mapping 1
0 : Step 0
A : Step 10 (SET ID 10)
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
63 : Step 99 (SET ID 99)
64 : Step 100
*Real data mapping 2
0 : -20
5 : -19
A : -18
5F: -1
64: 0
69: +1
C3 : +19
C8 : +20
133