Wi-Fi Settings - Samsung Galaxy S6 edge+ User Manual

4. Tap a Wi-Fi network to connect, enter the password (if it's not an open network), and then tap
Connect.
 Your phone is connected to the Wi-Fi network. You will see Wi-Fi

The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.

Entering a password is not required if an access point is not security protected.
Note: The next time your phone connects to a previously accessed secured wireless network, you will not
be prompted to enter the password again, unless you reset your phone to its factory default settings or
you instruct the phone to forget the network.
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone
to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain
closed wireless networks.

Wi-Fi Settings

Use the Wi-Fi settings menu to manually set your Wi-Fi connection options.
1. From home, tap Apps
2. Tap Wi-Fi.
 The Wi-Fi settings menu appears.
3. Tap On/Off to turn Wi-Fi on.
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.

To disable Wi-Fi, tap On/Off again.
4. Tap Advanced.
 The advanced Wi-Fi settings menu appears.
5. Configure your Wi-Fi settings.
 Your Wi-Fi settings changes are saved.
Connectivity
> Settings > Connections
in the status bar.
.
201