Do It Yourself - Avanti MONT Owner's Manual

DC> I I V C > l . . J A S E L F
SPARK PLUG
- Disconnect the plug adapter. (1)
- Remove the spark plug using the plug spanner
provided in the Tool Kit.
- Clean the plug electrodes with wire brush.
- Remove all foreign material by blowing air.
- Adjust the gap as specified in the Fig 6.
- Assemble the plug and connect the adapter.
RECOMMENDED SPARK PLUG IS "MICO W 225 Zt "
AIR FILTER CLEANING
- Slacken the clamping screw (2)
- Pull out Air filter assembly from carburettor.
- Take out Air filter from intake cover.
- Wash the air filter with diesel or detergent
solvent.
- Blow compressed air and reassemble.
Fig. 6
1. Adapter.
2. Spark Plug gap (0.4 · 0 .6 mm.)
Fig.7
1. Air filter assy.
2. Clamping Screw.
•:
.. . . . .
- : ~
""'
'
.
·, •
' ·
~­
I
M
... .
,.
:
'
'_,-;.--
/,. "o
./
~
CLOGGED AIR FILTER OR SPARK PLUG WILL REDUCE THE MILEAGE
18