Summary of Contents for NDT SH SERIES
- Page 1 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Ultrasonic Cleaners User Manual SH-Series Phone: 913-685-0675 sales@ndtsupply.com Fax: 913-685-1125 www.ndtsupply.com...
- Page 2 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Warranty Ultrasonic Cleaners, when used in accordance with manufacturer's instructions and under normal use, are guaranteed for one year parts and labor and an additional year of parts only. Within the period...
-
Page 3: Warranty
NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Front Cover WARRANTY Safety Precautions Introduction Ultrasonic Cleaners Accessories Unpacking Your Cleaner Installing Your Cleaner Equipment Specifications How Ultrasonic Cleaning Works Operating Your Cleaner Draining Your Cleaner Optimizing Your Cleaner Application Hints... - Page 4 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Before using your Ultrasonic Cleaner, please read and thoroughly understand these safety precautions. Failure to follow them may result in serious personal injury or property damage. To avoid electrical shock: •...
- Page 5 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Ultrasonic Cleaners These SH-Series line of ultrasonic cleaners includes seven models with sizes ranging from 46 Liter (18 gallon), 28 Liter (7.5 gallon), 17 Liter, 15 Liter (4 gallon), 10 Liter, 6 liter, 4 liter, 3 Liter, 2 liter, and 0.7 liter.
-
Page 6: Equipment Specifications
NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Equipment Specifications: Tank Ultrasonic Unit Dimensions Tank Weight Power U.S. Warranty Heat (w/ Capacity Frequency (L x W x H) Dimensions Supply Power Temp (L x W x H) (Watts) Control) 6.5”... - Page 7 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA How Ultrasonics Work Dirty items come clean in ultrasonic cleaning systems when millions of superheated bubbles scrub grime and oxidation away with stunning results. How? Through the process of de-cavitation. Ultrasonic cleaning systems send high frequency sound waves ripping through an ultrasonic cleaning solution leaving superheated bubbles in the waves’...
-
Page 8: Operating Your Cleaner
NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA and hard to reach corners of every nook and cranny get cleaned by the ultrasonic cavitating action. Ultrasonic sweep cleaning technology enhances the system’s ability to clean. Ultrasonic Cleaning Power and Frequency Ultrasonic system power is rated in how much energy, in watts, is generated in the ultrasonic tank. - Page 9 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Explanation of Controls Control Function HEAT Activates heat to 70 C Maximum. TIMER Activates ultrasonics and sets time. Turn Knob to desired heat. Turn clockwise to hold position for continuous heat operation.
- Page 10 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Step Action Select your cleaning solution (refer for solution effects on metals) Allowing for the volume of the parts you will be cleaning and operation level line (one inch from the top)
- Page 11 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Control Function On button Green touch button located on the left lower half of panel. Press to activate power to cleaner. Off button Red touch button located on the middle lower half of panel.
- Page 12 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Warning Do not immerse the cleaner in water. Unplug the cleaner from the power source. 0.7L, 2L, 3L, 4L, and 6L models do not have a drain. To empty, use the side of the rim to pour the used solution into a waste disposal unit, rinse the tank thoroughly and refill with new solution.
- Page 13 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Low solution level - will cause the cleaner to fail. When you remove heavy or bulky loads from the cleaner, the solution level may drop below the operating level. If so, be sure to replace lost solution and degas, if necessary, depending on the amount used.
- Page 14 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Application Hints CAUTION Never clean novelty or inexpensive jewelry in the cleaner. The combination of heat and vibration may loosen a cement-held setting. Never clean gemstones such as emerald, amethyst, pearl, opal, coral, turquoise, peridot or lapis lazuli in the cleaner.
- Page 15 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA How it works: • Fill the tank with warm water and a cleaning solution. • Place the items to be cleaned in a perforated tray and lower them into the tank. You can also suspend items on a wire and then immerse them in the solution.
- Page 16 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Alkaline water-based solutions: include carbonates, silicates and caustics. These cause emulsifying action, which keeps soil from redepositing on the cleaned surface, and improves cleaning action in hard water. Alkaline strength Removes: Mild Light oils and greases, cutting oils and coolant compounds.
- Page 17 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Acetophenone Chloric Acid Hydrofluosilicic Acid Aluminum Chloride Chlorine, Anhydrous Iodoform Aluminum Fluoride Chromic Acid Mercuric Chloride Aluminum Sulphate Copper Chloride Muriatic Acid Ammonium Bifluoride Copper Fluoborate Phosphoric (crude) Ammonium Chloride Ethyl Chloride...
-
Page 18: Troubleshooting
NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Troubleshooting If your cleaner does not operate satisfactorily, please check the tables below for possible causes before calling your authorized service center. Warning High voltage inside - dangerous shock hazard. DO NOT attempt to disassemble or repair the cleaner. - Page 19 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Problem Cause What to do Cleaner operates but does not Malfunctioning heater or Call nearest authorized service center. maintain set temperature. sensor components. Interrupted calibration sequence. Press SET DISPLAY. Cleaner operates but display does Timer board malfunctions.
- Page 20 NDT Supply.com 7952 Nieman Road Lenexa, KS 66214 USA Technical Support: Sharpertek 2005 Pontiac Rd Bldg A Tel: 248-340-0593 Auburn Hills MI 48326 Fax: 248-340-6189 Sales1@sharpertek.com Phone: 913-685-0675 sales@ndtsupply.com Fax: 913-685-1125 www.ndtsupply.com...