Automatic Channel Setup 11 - Philips VRZ244 Owner's Manual

Philips video cassette recorder owner's manual

Hide thumbs

Table Of Contents

Table of Contents

VRZ264

4/8/99 7:28 PM

Although your VCR may automatically memorize the channels you

receive when you turn it on for the first time, this function lets

you set up channels again. Make each entry within one minute of

the previous entry.

Press the VCR button, then press the MENU button.

SELECT , 9

CHOOSE :/OK

A VCR SET UP

TUNER SET UP

INITIAL SET UP

TO END PUSH EXIT

Press the PLAY 8 or STOP 9 button to select TUNER

SET UP, then press the :/OK button.

SELECT , 9

CHOOSE :/OK

A CABLE/ANTENNA

AUTO CH. PROGRAMMING

ADD/DELETE CH.

TO END PUSH EXIT

Press the :/OK button repeatedly so that ANT (if you

have an antenna) or CABLE (if you have a cable connec-

tion) appears beside CABLE/ANTENNA.

Press the STOP 9 button to select AUTO CH. PRO-

GRAMMING, then press the :/OK button. AUTO CH. SET

PROCEEDING PLEASE WAIT and a scale that shows the progress

of channel setup will appear on-screen. The VCR will memorize all

the channels you receive.

Wait for a few minutes while the VCR sets up channels.

When programming is complete, AUTO CH. SET COMPLETED

will appear on-screen. Then, the programming of the lowest chan-

nel number placed in the VCR's memory will appear on-screen.

Now when you press the CH(annel) 8/9 buttons, you will scan

only through channels you receive.

Page 11

CABLE