Table of Contents
Advertisement
Event ID code
0434
0481
0482
0485
0484
0483
04FE
0479
04FF
0891
0892
0894
0898
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
Cause and solution
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again
Communication with computer was disconnected. Restart the network software.
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the DHCP setting in the Network menus.
A communication error has occurred. Try restarting the networks fotware and your
projector. If that does not solve the problem, contact Epson for help.
Projector Information Display - Info Menu
106
Advertisement
Table of Contents
