Installation - D-Link DAP-2695 Quick Install Manual

To power the access point, you can use one of the following 3 methods:
Method 1 - Use if you have a PoE switch or router.
Method 2 - Use if you do not have a PoE switch or router and do not
Method 3 - Use if you do not have a PoE switch or router and have a
Method 1
1. Connect one end of your Ethernet cable to the LAN1 (PoE) port on the access
point.
2. Connect the other end into one port on a PoE switch or router.
DAP-2695 Install Guide

Installation

have a power outlet near the location of the access point.
power outlet near the location of the access point.
5