Page 1
Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.
FCC regulations • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3
• The antenna(s) used for this transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. This device is compliance with SAR for general population / uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.
Package contents User Manual Power adapter and cable Quick Start Guide Battery Mobile Internet device Stylus (touch pen) USB extension cable Earphones...
Front-right view Front and right components Touchscreen Touch zone Home button Returns to Home screen. Keypad button Enables the keypad.
Page 6
Power button Turns your device on or off. Ventilation holes For dissipating heat and keeping your device at an optimal temperature. Headset jack microSD slot Ctrl key System indicator WLAN indicator Power indicator Speakers...
Left side view Left-side components Stylus Device for tapping the touch screen. USB socket For connecting peripherals such as mice, keyboard or MP3 players that use the USB interface. Power socket For connecting AC power supply to power the device and charge the battery.
Rear view Rear components Stylus Device for tapping the touch screen. Ventilation holes For dissipating heat and keeping your device at an optimal temperature. Battery cover...
Using Touch zone • Scroll up and down: The page is scrolled up or down following your finger's movement. Using the on-screen keypad Whenever text entry is required, press the keypad button bring up the on-screen keypad.
Basic setup Setting time To setup the system clock, you need to set the time and the date > Time, and tap Setup. Settings Date & Setting BenQUtility The connectivity of your device is determined by BenQUtility. 1. To launch it you can go to >...
Using the microSD card You can copy files from a loaded microSD card to your device or vice versa. Inserting the microSD card 1. Open the microSD card slot cover. 2. Push to insert the microSD card into the slot as illustrated.
Connect the small end of the provided USB extension cable to your device, and another end to the USB connection cable. And then you are ready to connect your device to another USB device. Your device can also be connected to a computer and works as a USB mass storage device.