Usb Routing (Usbaudio: Routing) - Boss GP-10 Parameter Manual

USB Routing (USBAudio: Routing)

STANDARD
Use this setting if you're playing guitar while playing back a song from your computer .
Only the sound of the GP-10 is output to the computer .
GK MODELING
GK IN
SETTING ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
USBAudio: IN Lv
PC OUT
MIX
Use this setting if you're playing guitar while playing back a song from your computer .
The sound of the GP-10 and the backing from the computer are mixed and output to
the computer .
GK
MODELING
GK IN
SETTING ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
USBAudio: IN Lv
PC OUT
DRY-GUITAR
Use this setting if you want to "re-guitar" or "re-amp" your guitar sound after you've
recorded it .
The original sound of the guitar without modeling or effects is output to the computer .
The individual strings are output as six separate channels from the modeling signal
route, and the original sound from the normal guitar route is also output .
GK
MODELING
GK IN
SETTING
ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
USBAudio: IN Lv
PC OUT
8
PC GK 1–6 IN
USBAudio: OUT Lv
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT
PC GK 1–6 IN
USBAudio: OUT Lv
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT
PC GK 1–6 IN
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT
I
RE-GUITAR/AMP
Use this setting if you want the original sound of the guitar without modeling or
effects to be input to the GP-10 so that you can re-guitar or re-amp .
GK MODELING
GK IN
SETTING ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
PC OUT
II
RE-GUITAR/AMP
Use this setting to re-guitar along with backing that's played back from your computer .
GK
MODELING
GK IN
SETTING ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
USBAudio: IN Lv
PC OUT
DIRECT OFF
Use this setting if you want the signal processed by plug-in effects on your DAW to be
output to the GP-10's OUTPUT .
The output of the GP-10 is output only to your computer .
GK MODELING
GK IN
SETTING
ALT TUNE
NORMAL PU IN
PC GK 1–6 OUT
USBAudio: IN Lv
PC OUT
What is RE-GUITAR/RE-AMP?
These are techniques in which the original sound of the guitar without modeling
or effects is recorded on your DAW so that you can create the final guitar sound
afterward .
Have you ever experienced either of these regrets or failures after recording an
effect-processed guitar?
• You played well, but you're not happy with the sound .
• The guitar sound no longer stands out when combined with other parts in
your DAW software .
As long as you still have the original sound, you can use re-guitaring or re-
amping to reshape the sound of your original performance as many times as
you like, letting you record a truly satisfactory sound and performance into your
DAW .
If you want to record the original sound of your guitar without modeling or
effects, choose "DRY-GUITAR, " and then use "RE-GUITAR/AMP I" or "RE-GUITAR/
AMP II" to re-record it .
Owner's Manual p. 13
PC GK 1–6 IN
USBAudio: OUT Lv
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT
PC GK 1–6 IN
USBAudio: OUT Lv
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT
PC GK 1–6 IN
USBAudio: OUT Lv
PC IN
FX CHAIN
OUTPUT
LEVEL
OUTPUT