JVC XM-P55 Service Manual page 24

XM-P55
XM-PJ1
Removing the Feed Motor/ Screw
Shaft Assembly and Wheel Gear
1. Unsolder the two harnesses extending from the feed
motor.
2. Remove the screw D attaching the feed motor, then the
spring. Remove the feed motor from the feed motor base.
3. Lift the feed motor base and pull out the screw shaft
assembly.
2-22
Wheel gear
Shaft base
Screw shaft gear
D
Feed motor
Fig.10
D
Spring
Feed motor base
Soldering