Table of Contents
Advertisement
❚❚ Interval Timer Photography
D
Before Shooting
Before beginning interval timer photography, take a test shot at
current settings and view the results in the monitor. Once settings
have been adjusted to your satisfaction, remove the rubber eyecup
and cover the viewfinder with the supplied eyepiece cap to prevent
light entering via the viewfinder interfering with photographs and
exposure.
Before choosing a starting time, select Time zone and date in the
setup menu and make sure that the camera clock is set to the correct
time and date (0 126).
Use of a tripod is recommended. Mount the camera on a tripod before
shooting begins. To ensure that shooting is not interrupted, be sure
the camera battery is fully charged. If in doubt, charge the battery
before use or use an AC adapter and power connector (available
separately).
1
Select Interval timer shooting.
Highlight Interval timer shooting in
the photo shooting menu and
press 2 to display interval timer
settings.
59
Menu Guide
Advertisement
Table of Contents
