Running A Diagnostic Test - Axis StorPoint NAS 100 User Manual
Network hard disk server
Hide thumbs
Also See for StorPoint NAS 100:
- Manual (34 pages) ,
- Manual (5 pages) ,
- User manual (108 pages)
Table of Contents
Advertisement
Appendix B: Troubleshooting
90
Running a Diagnostic Test
Before you begin
Procedure
The StorPoint NAS Web Pages include a diagnostic test that you can
run in order to check the memory and the performance of the
connected drives.
Note the following:
•
Users that are currently accessing the StorPoint NAS will be
interrupted.
•
The diagnostic test is only available the first hour after startup.
•
If you want to repeat the test, you must first restart the StorPoint
NAS.
To perform the diagnostic test, follow these steps:
1. Start the Web browser, and enter the URL of the Diagnostics page
in the location/address field:
http://<IP address>/this_server/diag.shtml
Example
http://192.16.253.80/this_server/diag.shtml
2. The Diagnostics page appears:
StorPoint NAS 100 User's Manual
Advertisement
Table of Contents
