Before Using Your Vcp 5 - Philips VP115CAT Owner's Manual

Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by sliding the lid in the direction of the arrow.
2
Insert two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
Point the remote control at the VCP's remote sensor when oper-
ating the VCP. Details are on page 14.
Do not put objects between the remote control and the VCP.
Battery Usage CAUTION
To prevent battery leakage that may result in bodily injury or dam-
age to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit.
Do not mix batteries, for example, old with new or carbon with
alkaline.
Remove batteries when the unit will not be used for a long time.
VCP Maintenance
Use only tapes with the
Remove any light adhesive stick-on notes from the video cassette
tape before putting the tape in the VCP. Removable labels can
jam the VCP.
The VCP requires periodic maintenance to maintain its excellent
performance. This VCP has an Automatic Head Cleaner.
However, the video heads will require replacement eventually.
Only an authorized service center should perform this service.
Types of Video Cassette Tapes/Tape Speeds
The chart below shows the playback time for three types of video
cassettes (T160, T120, and T60). There are three playback speeds:
SP, LP, and SLP.
You can only play a tape in the speed in which it was recorded. You
can not change the tape speed at the VCP.
The slower the tape speed, the more programming will fit on the
tape. SLP is the slowest tape speed.
Cassette type/Playback Time
Tape Speed T160
SP 2 hrs.
(standard play)
40 mins.
LP 5 hrs.
(long play)
20 mins.
SLP
(super long play)
8 hrs.
mark.
T120 T60
2 hrs. 1 hr.
4 hrs. 2 hrs.
6 hrs. 3 hrs.

Before Using Your VCP 5

1
2
3