Tone Settings - Nokia 7210 User Manual

54543_en1.fm Page 57 Friday, August 2, 2002 11:59 AM
time. Press any key to deactivate the screen saver. Screen saver is also
deactivated when the phone is out of the network coverage area.
Press Menu, and select Settings,
timeout. Select the timeout when the digital clock display will be
activated. The length of the timeout can vary from 5 seconds to 60
minutes.
Note that the screen saver overrides all the graphics and texts on the
display in standby mode.
Display brightness
You can change the display brightness level used on the phone display.
Press Menu, and select Settings,
Scroll with and
and press OK to accept it.

Tone settings

Press Menu, and select
same settings in the
Note that the settings you make, change the settings in the active
profile.
Select Incoming call alert
incoming voice call. The options are Ringing, Ascending,
once and Off.
Select Ringing tone for incoming voice calls. To select ringing tones that
have been saved in the Gallery, select
list.
Select Ringing volume
messages. The vibrating alert does not work when the phone is
connected to a charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone via OTA or by downloading, you
can save the ringing tone in the Gallery.
Select Message alert tone
messages, Keypad tones, or
tones for example, when the battery is running out of power.
Display settings
Display settings
to decrease and increase the brightness level,
Settings and then Tone settings. You can find the
Profiles menu, see Profiles (Menu 3) on page 51.
to select how the phone notifies you of an
Open gallery
and Vibrating alert for incoming voice calls and
to set the alert tone for the incoming
Warning tones to set the phone to sound
M e n u f u n c t i o n s
and Screen saver
and Display brightness.
Ring once, Beep
from the ringing tone
57