Remote Control Buttons - Philips SV2000 SVZ122 Owner's Manual

SVZ122(H1680).QX33 4/6/99 9:42 PM
Use to watch a tape, to watch a program while recording it, or to
watch a TV broadcast using the CHANNEL o/p or Number
Use to watch TV or to watch one program while recording anoth-
Press to scan up or down through the VCR's channels after the
channels have been set up. Details are on page 12.
Press to play a tape over and over. Press again to cancel the
Press to display the clock or the real-time counter on the TV screen.
Press to memorize a tape position at which the real-time counter
Press to set the real-time counter to zero. Details are on page 36.
Use to enter digits and information when programming a function
in the on-screen menu (setting the clock, for example). Press to
During recording, press to temporarily stop the recording. Details
are on page 24. You can not pause a One-Touch Recording. Details
are on page 25. During tape playback, press to freeze the picture.
Press repeatedly to change the position of the noise lines in a Still
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on-screen. Details are on page 34.
Press to add or delete channel numbers. Details are on page 13.
Page 19
Press to eject the tape.
Use to select the signal that your TV receives.
er. Details are on page 31.
CHANNEL o/p Buttons
AUTO REPEAT Button
Repeat Play feature.
CLOCK/COUNTER Button
COUNTER MEMORY Button
was set to 0:00:00. Details are on page 36.
COUNTER RESET/EXIT Button
Press to remove menus.
Press to stop the tape.
select an item in the on-screen menu.
PAUSE/STILL Button
picture. Details are on page 34.
Remote Control Buttons (cont'd) 19
EJECT Button
VCR/TV Button
VCR Position
buttons.
TV Position
POWER
SPEED
MENU
REWIND
RECORD
STOP Button
F.FWD Button
VCR/TV EJECT
1 2 3
4 5 6
7 8 9
CHANNEL
0 +100
RENTAL AUTO CLOCK/
SELECTOR REPEAT COUNTER
DISPLAY EXIT COUNTER
RESET MEMORY
/ PLAY F.FWD
/ STOP
PAUSE/STILL