Download Print this page

Intel DQ963GS Quick Start Manual page 3

Advertisement

connections?
Upgradeable?
Onboard SCSI fitted? Type
No of channels?
Manufacturer?
Model Number?
Speed?
Number of IDE channels
Maximum number of disks
Number of SATA Channels
Diskette drive Interface
Internal connectors
Rear I/O connectors
Memory type
For RIMMs install CRIMM in
empty sockets
Number of memory sockets
Maximum memory support
Supported memory speed
BIOS
Instantly
Available PC
Technology
Hardware Monitor
Subsystem
MTBF
Viglen Ltd.
Yes via PCI
No
N/A
N/A
N/A
N/A
One Parallel ATA IDE interface with UDMA 33, ATA-66/100/133 support
2
Four Serial ATA (SATA) channels (3.0GB/s), via the ICH8, one device
per channel.
1
2 x USB connectors for 4 additional
USB 2.0 devices
1 x HD Audio Link Header
1 x Parallel Port
1 x VGA port
6 x USB 2.0 ports
2 x PS/2 Ports
DDR2
Supports:
Unbuffered, non-registered single or double-sided DIMMs
Non-ECC memory
Serial Presence Detect (SPD) memory only
N/A
Four 240-pin DDR2 1.8 V SDRAM Dual Inline memory Module (DIMM)
sockets
• Support up to 8GB of system memory using DDR2 533 or DDR2 667
DIMMS
DDR2 533/667 MHz single or Dual channel DDR2 DIMMS
• Intel® BIOS (resident in the SPI Flash device)
• Support for Advanced Configuration and Power Interface (ACPI), Plug
and Play,
• Support for PCI Local Bus Specification Revision 2.3
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
• Intel® Quiet System Technology implemented through ICH8
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan headers
• Three fan sense inputs used to monitor fan activity
130,087 hours.
-3-
1 x Serial port header
1 x Front panel audio header
1 x RJ045 LAN Port
1 x Audio In
1 x Audio Out
1 x MIC
PMPGS001

Advertisement

loading