Button Functions - Philips Trilingual Front CoverArt PHBIG3 Instruction Manual

Button Functions

1.
2.
3.
4.
5.
6.
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs,
you might need to press the REC button once, then
press it again for three seconds.
Some buttons on the remote might have functions
that are referred to by different names on the
device you are controlling. E.G. PREV.CHAN
may be called RECALL, or ENTER may be
called DISPLAY. These differences depend on the
brand and model of your product. Also, this remote
can only operate features that exist on your prod-
uct. E.G., your product must have PREV.CHAN
ability for the PREV.CHAN button to operate this
feature.
4
Button Functions, cont.
12.
1. Red Indicator Lights when any button is
pressed.
2. TV, VCR, CBL Selects product to be oper-
ated.
11.
3. CODE SEARCH Used for setup.
4. NUMBERS Enter numbers for direct channel
selection. Some products require Enter to be
10.
pressed after channel selection.
5. ENTER Used after direct channel number
entry to immediately change to the selected
9.
channel.
6. RECORD, PLAY, STOP, REW, FF,
PAUSE
8.
VCR control buttons operate your VCR even
when the remote is set to operate the TV.
7. TV/VCR For some TVs, press repeatedly to
7.
select from available viewing sources (antenna,
cable box, VCR, etc.).
8. PREV. CHAN Returns to the previously
selected channel, or DVD repeat toggle.
9. VOLUME UP/DOWN Changes the volume
level of the product, normally the TV.
10. MUTE Turns off the TV sound while the
picture remains.
11. CHANNEL UP/DOWN Changes the
channels.
12. POWER Turns product On or Off.
5