Advertisement
Quick Links
Advertisement
Related Manuals for Pyle PFSHCMR1
Summary of Contents for Pyle PFSHCMR1
-
Page 1: User Manual
User Manual... - Page 2 Functions Functions Congratulations on your purchase of a Fishing Partner FDV031. We would like to express our sincere gratitude for your trust on our products. In order to optimize the performance of the product and prolong its life time, we strongly recommend you carefully read this user manual before use.
- Page 3 First insert the plug of the camera firmly into the main unit, and turn on the power switch, then the images transferred from the camera will be shown on the LCD monitor. Video camera The underwater camera and 3.5-inch monitor are provided as a complete package, and designed to monitor movements of fish stocks under the water.
- Page 4 Notes Notes Please carefully read these precautions before using the product, in order to operate it in a proper and safety manner, optimize its performance and prolong its life time. Take good care of the product all the times. Prevent water or sand particles from enteringinto the product while using it on the beach or waterside.
- Page 5 First insert the plug of the camera firmly into the main unit, and turn on the power switch, then the images transferred from the camera will be shown on the LCD monitor. Make sure to fully charge the battery for 8 hours before first use. Don’t disassemble the monitor (main unit) during consequent uses.
- Page 6 Appearance Keypad Appearance Keypad 1.Camera Neck 2.Camera Housing 3.Central Ring 4.IR LED 5.Lens 6.Light-sensitive diode...
- Page 7 1.Snap button 2.Record button 3.Playback 4.M(Menu) 7.wrist strap 8.TF card slot 9.Port for Lens 10.Indicator Light for charging(Red) 11.Sun-shield lid 12.TFT LCD 13.Power switch 14.USB Port 15.Reset...
- Page 8 Usage Configured with three IR LEDs, the camera is featured by an excellent light compensation capability so that you can capture dynamic movements of fish stocks in a very dark environment. The fishing line is made of a type of special soft material, available in a length of 15m, 20m or any other customized length upon requirements.
- Page 9 Accessories USB cable to the computer USB port and host (pictured above),Connect the camera with computer for charging in the shutdown state. The red indicator light for charging is on at this time and will be off after charging. In general, it can be fully charged after 8-9 hours. 2.
- Page 10 3. Set the display: 3.1 Set the language: Press the "M” key once after turning on the device to call up the menu on the LCD monitor (see the figure below). Now press the “[+]” or “[-]” key to select a desired language. Language Language...
- Page 11 3.2 Set the brightness: Press the "M” key twice after turning on the device to call up the menu on the LCD monitor (see the figure below). Now press the “[+]” or “[-]” key to adjust the brightness of the LCD monitor. The adjustment range is from 0 to 12.
- Page 12 3.3 Set the contrast: Press the "M” key three times after turning on the device to call up the menu on the LCD monitor (see the figure below). Now press the “[+]” or “[-]” key to adjust the contrast of the LCD monitor. The adjustment range is from 10 to 12.
- Page 13 3.4 Set the color: Press the "M” key four times after turning on the device to call up the menu on the LCD monitor (see the figure below). Now press the “[+]” or “[-]” key to adjust the saturation of the LCD monitor.
- Page 14 3.5 Reset: Press the "M” key five times after turning on the device to call up the menu on the LCD monitor (see the figure below). Now press the “[+]” key to confirm to restore the factory default parameters. The LCD monitor will then be reset to the factory default parameters. Reset...
- Page 15 4.1 camera: Connect the camera to the host, and then turn on it, the camera at the target scene time you press the record button to start recording To stop recording, press the video button. To do zoom operation, press the + or - key. Note: photos loaded into the storage card is required prior to (the machine can be used 4GB to 32GB TF card).
- Page 16 4.3 Playback: Turn on the host, according to a playback button to enter the playback mode, and will see after once again the photographs or video file, press the + or - button to select another picture or video. Play the video in the playback mode, select the video file, and then press the playback button to start playing this section of video, if you want to stop playing, press the playback button.
- Page 17 5.connected to the computer: The host can be directly connected via USB cable to the PC as a high-capacity removable disk connected to your computer through the Windows file manager to browse in the TF card photos or video file.When you unplug the USB cable ,the camera will automatically turn off .finally, the power switch dial to OFF.
- Page 18 Technical Data – Camera: Overall dimensions 30mmx17.8mm (L x DN) Weight Approx. 10g Power supply Power supplied by the main unit: 3.7V lithium battery Sensor 1/4 inch (0.3Mega pixels) sensor wafer Resolution 720x480 Pixels Horizontal angle ≥130° Working temperature -10℃～40℃ Working depth 15M below the water surface Length of line...
- Page 19 Technical Data – Monitor: Overall dimensions: 103mmx72mmx17mm(W x H x T) Display 3.5-inch LCD Resolution 320x240 Backlight brightness 300cd\㎡ Power supply Rechargeable lithium battery 3000mA/H Voltage 3.7V Power consumption 2.5W Battery capacity (for 7 - 8 hours ((fully charged) continuous use) Weight 200g Working temperature...
- Page 20 Packing list (standard): User Manual 1PCS 5 Floating Ball 1PCS Camera (with cable) 1PCS 6 Central Ring 2PCS Monitor (main unit) 1PCS 7 Charger 1PCS Monitor bracket 1PCS 8 USB Cable 1PCS Shop for quality Pyle products on our website.