Extra Possibilities; Learn A Key - Philips SRM 5100 User Manual

SRM5100_Def 31-05-2007
)
...........................................- turns the menu on and off (TV, STB, AMP).
¡
...........................................shows live TV on the currently selected channel.
™ - + .......................................- selects a previous or next channel (PC, Media
£ i ..............................................- displays on-screen channel information (TV, STB,
Receiver
1 Green LED ..................lights up when the receiver is deriving its power
2 USB connector.........connects to the USB port of your Windows Vista
3 Red LED ........................- lights up when the PC / laptop starts looking for
If the device does not respond at all, or not to all of the key
commands, follow the instructions under 'Setting the remote control'.
It is possible that you must enter another code for the device.

4. Extra possibilities

Learn a key

If you miss certain functions from your original remote control on the
SRM 5100, the SRM 5100 can learn these functions from the original remote
control.You can store a function under any of the available keys of the
SRM 5100, except ™
stored under a key will be deleted.
Microsoft, Windows, Windows Logo, and Windows Vista are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
Example of TV (TV, LCD TV, plasma TV, projector, HD TV):
Make sure you have the original TV remote control at hand.
1
Place both remote controls on a flat surface
(like a coffee table) and aim them head-to-
head with about 5 - 10 cm in between.
2
Press the MODE key to select TV.
Press the key until the TV LED lights up.
– The LED lights up for 10 seconds and then
goes out.
16:43 Pagina 9
Instructions for use
- opens DVD menu (PC, Media Center).
Center,TV, STB).
- selects a previous or next preset channel (AMP).
AMP).
- provides information for the focus point.
An icon indicates your position in the menu
(PC, Media Center).
from the PC / laptop.
based PC / laptop.
the driver.The LED goes out as soon as the
driver is found.
- lights up when the receiver receives a signal from
the remote control.
and MODE. Please, note that any function already
™
9