Pl1Irr Programming Remote Overview; Infrared Remote Control Features - Philips SELECON PL1IRR User Manual

User's Guide

PL1IRR PROGRAMMING REMOTE OVERVIEW

Infrared Remote Control Features

Program -
Enter - After the luminaire to be
programmed is selected (by Laser),
press Enter to set the luminaire to
programming mode.
Laser (Luminaire Selector) - Press
Laser to select individual luminaire for
programming / adjustment.
Exit - Press to exit programming mode.
Cancel -
Cancels the learn features (any
programming made will not be
recorded) RGBW will not be changed.
Learn -
After adjustments are made, the Learn
button (in conjunction with a preset
button) stores the new settings to a
specific preset if desired.
Preset (White Color Temperature) -
Allows selection of Warm, Cool or Day
color temperatures.
Note, only intensities may be stored
on White Color Temperature presets.
These presets cannot be edited or
changed
4
PL1IRR PROGRAMMING REMOTE OVERVIEW
PROGRAM
ENTER
COLOR
RED GREEN
PRESETS
WHITE
WARM COOL
1 2
4 5
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
WARNING! THIS DEVICE IS A CLASS 2 LASER. DO
LASER DIODE
NOT STARE OR LOOK DIRECTLY INTO BEAM.
WAVELENGTH: 630 - 680 nm
MAX OUTPUT: <5 mW
Figure 2: PL1IRR Programming Remote
Laser / IR Window -
Laser and IR programming emits from
this end.
PL1IRR LED (indicator) -
The LED indicator will flash each time
LASER EXIT
a button is pressed.
CANCEL
Intensity Raise/Lower -
Press top button to raise intensity and
LEARN
INTENSITY
bottom button to lower it. Tap the up
for 2% increase or tap down for a 1%
decrease. Press and hold (top or
bottom button) for sequential raise/
lower.
BLUE WHITE
Individual LED Color Adjustment -
Allows the raising or lowering of
individual LED colors. Press top
button to change color and bottom
button to lower it. Tap the up for 2%
increase or tap down for a 1%
decrease. Press and hold (top or
bottom button) for sequential raise/
lower.
DAY
Presets (6 Levels or Off) -
3
Allows selection and programming of
6 OFF
one of six Presets (1 through 6) or
PL1IRR
Preset Off.
Note, Off cannot be edited or changed.
PL1IRR Remote Control