Table of Contents
Advertisement
TMa550.book Page 68 Wednesday, October 3, 2001 10:57 AM
68
Parameter
Mode
Base I/O address
DMA Channel
VGA Frame Buffer
Size
Note: VGA takes up a portion of system memory, configurable via
the VGA Frame Buffer parameter. For example, if you have 128
MB SDRAM, and you set a VGA Frame Buffer of 16 MB, main
memory is 112 MB.
Security
The Security screen contains parameters that help safeguard and
protect your computer from unauthorized use.
Main
User Password:
Set User Password:
Password on boot:
F1 Help
Esc Exit
Description
Sets the operation mode of the parallel port.
Options: ECP, EPP or Bi-directional
Sets the I/O address of the parallel port. This
parameter is enabled only if Mode is set to ECP or
Bi-directional.
Options: 378, 278 or 3BC
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Options: 3 or 1
Specifies the amount of main memory to allocate
for VGA.
Options: 16 Mb, 32 Mb or 8 Mb
System Devices
Security
Others
Clear
[Enter]
[Disabled]
↑↓
Select Item
F5/F6 Change Values
←→
Select Menu
Enter Select > Sub-Menu
5 Software
Boot
Exit
Item Specific Help
F9
Setup Defaults
F10 Save and Exit
Advertisement
Table of Contents
