Flag Pole Bracket; Adjusting The Front Shock Absorber Assemblies - Yamaha XZ10YMXH Owner's Manual

EBU35660

Flag pole bracket

This model is equipped with a flag pole brack-
et.
1
4
1. Flag pole bracket
ECB03010
NOTICE
Do not use the flag pole bracket as a cargo
hook.
EBU36463
Adjusting the front shock absorber as-
semblies
The shock absorber assemblies are equipped
with a spring preload adjusting nut, a cross-
over adjusting nut (for YXZ10YMSH), a re-
1
bound damping force adjusting screw (for
YXZ10YMXH), a high speed rebound damp-
ing force adjusting bolt (for YXZ10YMSH), a
low speed rebound damping force adjusting
screw (for YXZ10YMSH), a high speed com-
pression damping force adjusting bolt, and a
low speed compression damping force ad-
justing screw.
EWB04140
WARNING
 Suspension components become hot
during operation. Never touch the com-
pression damping force adjusting bolt
and screw, the rebound damping force
adjusting bolt and screw, or the oil reser-
voir with your bare hand or skin until
suspension components have cooled.
4-30