Philips/Magnavox CCW135AT Owner's Manual page 12

12 Automatic Channel Setup (cont'd)
Adding/Deleting Channels
1
Press the MENU button.
TO ADJUST PRESS { / B
CH123
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
2
Press the PLAY/ button or the STOP/
CHANNEL, then press the F.FWD/B button.
TO ADJUST PRESS { / B
CH123
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
3
Press the Number buttons or the CHANNEL o/p but-
tons to enter the channel number you want to add or
delete.
TO ADJUST PRESS { / B
CH23
SAVED
> CHANNEL
INPUT
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
4
Press the F.FWD/B button or the REW(ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
5
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
2
button to select
1
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the MENU button.
2) Press the PLAY/
STOP/
PRIM.SETUP. Press the F.FWD/B
button.
3) Press the PLAY/
STOP/
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on-screen.
4) If all the programmed channels
don't fit on-screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on-screen. (If there are
no remaining channels, the previous
menu will appear.) Or press the
REW(ind) /{ button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
3
2 3
1
5 6
4
o
8 9
7
p
0
+100
o
p
o
PLAY
REW F.FWD
4
STOP
p
o
p
5
Helpful Hint
button or the
button to select
button or the
button to select CH MEM-