Displaying The Switch Profile Buffer - Cisco Nexus 5600 Series Configuration Manual

Displaying the Switch Profile Buffer

Step 2
Step 3
Step 4
Step 5
Step 6
Displaying the Switch Profile Buffer
Procedure
Step 1
Step 2
Step 3
The following example shows how to display the switch profile buffer for a service profile called sp:
switch# configure sync
Enter configuration commands, one per line.
switch(config-sync)# switch-profile sp
Cisco Nexus 5600 Series NX-OS System Management Configuration Guide, Release 7.x
22
Command or Action
switch-profile name
Example:
switch(config-sync)# switch-profile abc
switch(config-sync-sp)#
no sync-peers destination destination IP
Example:
switch(config-sync-sp)# no sync-peers
destination 10.1.1.1
switch(config-sync-sp)#
exit
Example:
switch(config-sync-sp)# exit
switch#
show switch-profile
Example:
switch# show switch-profile
copy running-config startup-config
Example:
switch# copy running-config
startup-config
Command or Action
switch# configure sync
switch(config-sync) # switch-profile
profile-name
switch(config-sync-sp) # show
switch-profileprofile-name buffer
Purpose
Configures the switch profile, names the
switch profile, and enters the switch profile
synchronization configuration mode.
Removes the specified switch from the switch
profile.
Exits the switch profile configuration mode.
(Optional)
Displays the switch profile configuration.
(Optional)
Copies the running configuration to the
startup configuration.
Purpose
Enters configuration synchronization mode.
Enters switch profile synchronization configuration
mode for the specified switch profile.
Enters interface switch profile synchronization
configuration mode for the specified interface.
End with CNTL/Z.
Configuring Switch Profiles
OL-31641-01