Sleep Timer - Philips/Magnavox CCA193AT Owner's Manual

46 Sleep Timer

Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
1
Press the SLEEP/WAKE UP button.
TO ADJUST PRESS s s / B B
–TIMER–
> SLEEP OFF
WAKE UP
ON-TIME
2
Press the PLAY/o o button or the STOP/p p button to select
SLEEP. Then, press the REW(ind)/s button or the
F.FWD/B button to select 30 MIN(utes), 60 MIN(utes),
90 MIN(utes), or 120 MIN(utes). (You can not set the sleep
timer during a recording.)
TO ADJUST PRESS s s / B B
–TIMER–
SLEEP
> 30 MIN
WAKE UP
ON-TIME
3
Press the STATUS/EXIT button. The TV/VCR will shut itself
off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
1
POWER SLEEP/WAKE UP
PLAY
REW F.FWD
STOP
STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
SLOW ALT. CH
SPEED MEMORY PAUSE/STILL
REC/OTR TRACKING
Helpful Hints
• To cancel the sleep timer, press the
SLEEP/WAKE UP button. Press the
PLAY/o button or the STOP/p but-
ton to select SLEEP, then press the
REW(ind)/s s button or the
F.FWD/B B button to select OFF.
Press the STATUS/EXIT button.
• To see how much time remains
before the TV/VCR shuts itself off,
press the SLEEP/WAKE UP button,
then press the PLAY/o button or
the STOP/p button to select SLEEP.
To remove the display, press the
STATUS/EXIT button.
2
3
CH.
VOL.
MUTE