Table of Contents
Advertisement
A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status
display will vary. To choose the status display mode, follow the
steps below.
If you select STATUS ON, then select COUNTER ONLY
OFF:
Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func-
tion buttons.
If you select STATUS ON, then select COUNTER ONLY
ON:
Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS OFF:
The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
1
Press the MENU button.
2
Press the PLAY/
button or the STOP/
VCR SETUP, then press the F.FWD/B button.
3
Press the PLAY/
button or the STOP/
ON-SCREEN MODE, then press the F.FWD/B button.
4
Press the PLAY/o button or the STOP/p button to select
STATUS, then press the F.FWD/B button so that ON or
OFF appears beside STATUS.
ON-SCREEN MODE
STATUS
[ON]
>
COUNTER ONLY
[OFF]
SELECT KL CHOOSE B
TO END PRESS EXIT
5
If you set STATUS to OFF, go to step 6. If you set STA-
TUS to ON, press the PLAY/o button or the STOP/p
button to select COUNTER ONLY, then press the
F.FWD/B button so that ON or OFF appears beside it.
6
Press the STATUS/EXIT button.
On-Screen Status Displays 25
button to select
button to select
• The status display will not appear
Current
Tape
Channel
Function
Time
12:00 AM
CH10
SLP
M 1:23:45
Tape
Counter
Speed
and
Counter
Memory
Helpful Hint
when you press the STATUS/EXIT
button during a One-Touch
Recording.
STOP
Hide quick links:
Advertisement
Table of Contents
