Table of Contents
Advertisement
h
If you have confirmed with the
with the
TIMER s
button.
E The programming information has been stored in a TIMER
block.
i
Make sure that the cassette you have put in can be
recorded on.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
a
Press
TIMER s
on the remote control.
b
Select the line '
TIMER PROGRAMMING
BP r
or
AP q
button and confirm with
TIMER PROGRAMMING
DATE PROG.
START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
--
--
--:-- --:---
ã Exit:
« press TIMER
c
Press
SqC
.
TIMER PROGRAMMING
DATE PROG. START END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15
xxx
15:36 15:50 -
ã
è
«
d
Select the entry field '
PROG.
SqC
button. Select '
the
or
BP r
AP q
20
button, exit the menu
OK
' with the
SqC
VPS
LP PDC REP.
-
-----
Start:
press è
VPS
LP PDC REP.
*
ONCE
Store:
press OK
' with the
DSr
or
' with
Record prepared
button.
e
Confirm with the
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
f
To end, press the
g
Place a cassette in the machine.
E If you have not connected the satellite receiver yet, use a
scart cable to connect scart socket
TV-VIDEO Combi to the corresponding scart socket on
the satellite receiver.
h
Programme the satellite receiver with the required
information (programme number on the SAT receiver,
start time, end time).
D The information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
.
Activating a recording from the SAT
receiver with OTSR (OTSR = One Touch Sat
Recording)
In the previous paragraph we described how to prepare the
TV-VIDEO Combi for recording from the SAT receiver by
means of the menu (step
you to record a SAT programme fast and easy with just one
button press.
a
Press the
Sr/q
timer light on your TV-VIDEO Combi starts blinking. It will
blink three times and will then stay alight.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
D Each time you programme a recording on the
satellite receiver, you must prepare your TV-VIDEO
Combi for recording. Each time you prepare your
TV-VIDEO Combi for a satellite recording a
TIMER-block will be reserved and the TIMER light at
the front will blink.
D If the TIMER light does not blink, you have not set
the clock or all TIMER-blocks have been used up.
Please read the paragraph 'Setting the time and
date' or 'How to clear a programmed recording
(TIMER)'.
D If you want to cancel the programmed SAT
recording, follow the procedure described in the
paragraph 'How to clear a TIMER'.
button.
OK
TIMER s
button.
on the
EXT. 1
a
f
through
). OTSR will allow
buttons at the same time until the
Advertisement
Table of Contents
