Decoder Allocation; Manual Tv Channel Search - Philips 14PV112/07 User Manual

Decoder allocation

Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
,
1.
1.
Use or
P+
P-
nel which you would like to allocate the
decoder to.
2.
2. Press . The main menu will appear.
MENU
3.
3. Use to select 'TUNER SET UP'.
K B L C
Then press
B 1
4.
4. Use to select 'MANUAL TUNING'.
K B L C
Then press
B 1
5.
5.
Use to select 'DECODER'.
K B L C
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
Use to select 'ON'
B 1
(Decoder switched on).
How can I switch off the decoder?
Use to select 'OFF' (Decoder switched
B 1
off).
7.
7. To end, press
STATUS/EXIT
The decoder has now been allocated to this TV
channel.
EN
to select the TV chan-
0..9
.
.
P55
055
[OFF]
[OFF]
.

Manual TV channel search

In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
1.
1.
Press . The main menu will appear.
MENU
2.
2.
Select 'TUNER SET UP' with
confirm with
B 1
3.
3.
Select 'MANUAL TUNING' with
and confirm with
4.
4.
Select 'PROG.' with
.
B 1
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
SELECT K L CHOOSE B
END=EXIT
5.
5.
With
K B L C
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
6.
6.
Select 'CHANNEL' with
firm with . Then enter the desired chan-
B 1
nel with
0..9 .
When a channel is found,it will stop searching. If
this is the channel you want, press
set ' SKIP ' on for a channel, this channel will be
ignored when going through the channels with
or .
P+ P–
To search for other TV channels, begin again at
step 4.
I don't know the channels for my TV stations In
this case, press
K B
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
7.
7. To end, press
STATUS/EXIT
6
K B L C
.
K B
.
B 1
. Then press
K B L C
P55
055
[OFF]
[OFF]
, select the desired
or
0..9
, and con-
K B L C
B 1
in 'CHANNEL' to start
L C
.
and
L C
.
B 1
. If you