Mounting And Adjusting - Philips SQM5232 User Manual

Attach the arms to the back of your display
3
using the bolts identified in Steps 1 and
2 and the corresponding lock washer
(C,F,I,orL).YouwillneedtousetheM6
washers(O)ifyouareusingtheM4,M5,
or M6 bolts. If your display has a curved or
recessed back, you may also need to use a
spacer(MorN).
Make sure the screws are snug, but do not
4
over-tighten.
5
Tip
E
Use a longer bolt and spacer for displays
with curved or recessed backs. Do not use
the M6 washer (O) if you are using the M8
bolts (J or K).
4

Mounting and adjusting

With the help of another person, carefully
1
lift your display and place it on the wall
plate. Do not release the display until the
mounting arms have securely hooked onto
the mount.
5
Carefully hook the display onto the
2
wall plate.
Warning
B
Insert the safety bar at the bottom of
the mount to avoid having the display
accidentally knocked off the mount.
  T hisMUSTbedoneinordertosecurethe
2
displaytothemount.NOTE:Acotterpin
(included) Is used to secure the arms to
themountORapadlock(notincluded)can
be inserted into the hole at the end of the
safety bar to help prevent theft of
your display.
6
7
6
7
7