Programming Tv Channels - Philips 20DV6942/37 User Manual

7 P
T
he TV can receive channels via an
Antenna or Cable TV signal, then
memorize the available channels.This
makes it easy for you to select only avail-
able TV stations when you use CH+o
and CH-p.
Make sure the Antenna or Cable TV sig-
nal is connected securely to the 75 OHM
ANTENNA INPUT before you begin.
Press MENU. Press 2 or 3 to
1
choose the Preset menu.
Press CH+o or CH-p to select
2
Tuner Mode.
Press 2 or 3 to choose
3
Antenna or Cable. Choose
Cable if you have Cable TV serv-
ice. Channels 1-125 will be possi-
ble. Choose Antenna if you con-
nected an indoor or outdoor
antenna to the TV/DVD. Channels
2-69 will be possible.
Press CH+o or CH-p to select
4
Auto Search.
3
Press to start scanning chan-
5
nels.The channels will count up
on the screen during the search.
When finished, the TV will go to
the lowest available channel.
"Completed" will appear briefly.
H H
ELPFUL INTS
In this same Preset menu, choose
Manual and use 2 or 3 to change
TV channels Up or Down.
You cannot select the Preset menu
if CH lock is On or when the unit is
in AV or DVD mode.
You can start Auto Search directly
by pressing and holding the MENU
button on the top of the TV/DVD.
TV C
ROGRAMMING
1-5
HANNELS
Tuner Mode
• Cable
• Channel
• Skipped Off
• Manual Up
• Auto Search
• Favorite list
POWER
OPEN/CLOSE MUTE TV/AV/DVD
SLEEP
1 2 3
CLOCK
4 5 6
S.EFFECT
7 8 9
DISPLAY PICTURE/DEL.
DVD10+
0
FAV.
TITLE RECALL MTS VOL+
1
MENU/PBC SETUP MENU VOL-
CH+
ENTER
CH-
SCAN SKIP
SEARCH
SLOW R/L MODE
LANGUAGE ANGLE SUBTITLE ZOOM
REPEAT
REPEAT STOP PLAY/PAUSE
A-B
/
3
·