Receiver Unit - Philips VL1100 Instructions For Use Manual

ENGLISH
6
Functional overview -
Product illustrations on inside flap
A)Transmitter unit
1 Power light
Lights green when power is switched on.
2 Remote control receiver light
Blinks red when a remote control signal is received.
3 ON/OFF switch
Switches the transmitter unit on and off.
4 DC 9V —<±
DC power supply socket for connection to the mains
5 AV SOURCE INPUT connectors
For connecting to an RCA or SCART enabled video source.
VIDEO (yellow) - video input connector
R-AUDIO-L - left (L) and right (R) audio input connectors
(R-red / L-white)
6 CHANNEL switch
Selects the desired frequency channel of the audio/video signal.The
number of channels you can select may vary from country to country.
7 IR
For connecting the remote control blaster cord if the video source does
not respond to signals from the remote control.
8 AC power adapter
B) Receiver unit
9 Power light
Lights green when power is switched on.
10 Remote control receiver light
Blinks red when a remote control signal to be transmitted to the video
source via the transmitter is received.
11 ON/OFF switch
Switches the receiver unit on and off.
12 DC 9V —<±
DC power supply socket for connection to the mains
13 TV OUTPUT connectors
For connection to an RCA or SCART enabled TV.
VIDEO (yellow) - video output connector.
R-AUDIO-L - left (L) and right (R) audio output connectors
(R-red / L-white).
14 CHANNEL switch
Selects the desired frequency channel of the audio/video signal.
The number of channels you can select may vary per country.
15 AC Power adapter