Bios Setup Utility; System Utilities - Acer TRAVELMATE 8172 Service Manual

System Utilities

BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input /
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup.Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when "Press <F2> to enter Setup" message is prompted on
the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to "enabled".
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
Information
CPU Type:
CPU Speed:
IDE 0 Model Name:
IDE0 Serial Number:
ATAPI Model Name:
System BIOS Version:
VGA BIOS Version:
Serial Number:
Asset Tag Number:
Product Name:
UUID:
F1 Help
Esc
Chapter 2
InsydeH2O Setup Utility
Main Advanced
Genuine Intel( R ) CPU
T2300 @ 1.66GHz
ST960821A-(PM)
3LF005DB
MATSHITADVD
V1.00
ATI V008.050I.0-26.00
xxxxxxxxxxxxxxxxxxxx (Max: 22 Byte)
xxxxxxxxxxxxxxxxxxxx (Max: 32 Byte)
xxxxxxxxxxxxxxxxxxxx (Max: 16 Byte)
xxxxxxxxxxxxxxxxxxxx (Max: 16 Byte)
↑↓
Select Item F5/F6
←→
Exit Select Menu Enter
Security Boot
Change Values F9 Setup defaults
Select4Sub-Menu F10 Save and Exit
Chapter 2
Rev. 3.0
Exit
29