Connecting To Wired Network - Teac R-4int Instruction Manual

Connecting to wired network

Step 1 – Choose LAN Setting
Note: a. make sure LAN cable connecting to LAN socket already.
1. Press and hold MODE/MENU to goes into 'Main Menu', and then turn
>, press SELECT to confirm.
2. Turn to < Network >, press SELECT, and then turn
press SELECT to confirm.
3. While cursor point to < Wired >, press SELECT to confirm, and then turn
enable >, press SELECT to confirm.
☺
The LAN setting is OK now!
to < System setup
to < Manual settings >,
to < DHCP
12