Using Gap Standard Compliance; Standby Mode; Verify The Signal - Philips XL340 User Manual

Place handset on the base unit or the charger and
let the batteries continuously charge for 24 hours
before using.
• The battery icon
when charging has started.
Note
The warranty does not apply to the batteries and
any other components which have a limited
lifetime or are exposed to wear.
3.4.1 Low battery warning
An empty battery icon
batteries need recharging.
Place the handset on the base unit or the charger
to recharge the batteries.
Note
Handset will go into sleep mode after reaching a
very low battery voltage level.
Note
A low battery alert (during off hook) will also
inform you that the handset has to be recharged.
If it happens during a call, the call may end shortly
after the alert.
3.4.2 Battery life and range
Optimal battery life is reached after 3 cycles of
complete charging and discharging. Optimal range
is reached when there is no other electrical
appliances working within the range area.
Getting started
appears on the screen
indicates the
Battery life in talking mode:
Battery life in standby mode:
Indoor range:
Outdoor range:

3.5 Using GAP standard compliance

The GAP standard guarantees that all DECT™
GAP handsets and base stations comply with a
minimum operating standard irrespective of their
makes. XL340 handset and base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take the
line, make a call and receive a call. The advanced
features may not be available if you use them with
other makes.
To register and use XL340 handset with a GAP
compliant base station from different make, first
follow the procedure described in the
manufacturer's instructions, then follow the
procedure described in this manual for
subscribing a handset.
To register a handset from different make to
XL340 base station, place the base station into
registration mode, then follow the procedure
described in the handset's manufacturer's
instructions.

3.6 Standby mode

Your phone is in standby mode when it is idle.
The standby screen displays the handset name,
handset number, battery icon, and the signal icon.

3.7 Verify the signal

The signal icon displays the link status
between your handset and the base unit.
is steadily on: Your handset and base unit are
linked.
is flashing: Your handset and base unit have
lost link.
Up to 12 hours
Up to 150 hours
Up to 50 meters
Up to 300 meters
9