Page 4
■ ■ Make sure you provide adequate protection against harmful emissions. ■ ■ ■ ■ ■ ■ ■ ■ Starting the engine must be done by only one person without any assistance. ■ ■...
5.Pull the recoil starter until you hear first firing. USE ONLY GENUINE SHINDAIWA BLADES No performance guarantee without using genuine shindaiwa blades No-load revolution speed: 3680 min (rpm) Use reinforced abrasive blades with maximum useable perimeter velocity of: 15,749 ft/min.(4800 m/min.)
Page 9
Fuel tank volume .......................800 mL Fuel (Mixture ratio) ..................Regular grade petrol........Minimum 89 Octane unleaded petrol is recommended. 50 : 1 (2 %) for ISO/CD13738), JASO FC, FD grade and shindaiwa 50 : 1 oil. Cutting device Belt ......................6PJ-808 Pulley ratio .......................2.87 : 1...
Page 10
Inner bore: 20 mm, 22 mm, 25.4 mm Wheels for: 355 mm outer diameter...
Page 14
■ ■ Be aware of kickback! Never cut an object using the upper-half of the cut-off wheel. ■...
Page 16
Item What to Do Daily Weekly Monthly As Required ■ Air Cleaner Clean ■ Cut-off Wheel Check and Sharpen ■ Bolts / Screws Check and Retighten ■ Fuel Cap Check Leakage ■ Fuel Tank Check Leakage ■ Wheel Guard Check Function ■...