Recording Two Or More Songs, And Selecting One For Playback; Recording While Playing Along With A Built-In Song - Casio WK-200 User Manual

WK200_03_e.fm 51 ページ ２００８年７月３１日 木曜日 午後２時３４分
Recording Two or More Songs,
and Selecting One for Playback
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
1.
bq
Press .
2.
5
Press .
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
Example: Track 2
P l a
3.
5
Press to record, or
To stop recording or playback, press
4.
5
Press twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down
pressing any keyboard key) until the message "Song Del?"
appears on the display. Press [+] (YES) to delete the song, or
[–] (NO) to cancel the delete operation.
B
bs
(10-key) to
N o .
y
bm
to play back.
bm
.
5
(without
Recording Your Keyboard Play
Recording while Playing Along
with a Built-in Song
This section explains how to play along and record along with
one of the Digital Keyboard's built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo, reverb,
chorus, layer/split settings, pitch bend wheel operation
(WK-500 only)
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1.
br
Press .
2.
5
Press .
This will enter playback standby.
Lights
3.
5
Press again.
This will enter record standby.
Flashes
Flashes
4.
bs
Use (10-key) to enter the song number you
want to assign to the recording.
E-51