X10 VT38A Owner's Manual page 10

Indoor/outdoor color camera with built-in 2.4 ghz wireless transmitter ,motion sensor, and dual floodlights

Hide thumbs Also See for VT38A:

If you are having difficulty turning the camera on/off remotely:

Try plugging the transceiver (the module with the antenna) into a different AC

outlet.

How do you focus the camera?

The motion activated camera is shipped preset to be in focus for normal use,

but if you want to change the focus you can remove the clear plastic cover and

rotate the inner portion of the lens. It might be a bit tight. Try turning it

counterclockwise first. If you turn it clockwise do not force or over tighten it.

Replace the clear plastic cover to keep the rain out.

If the motion sensor doesn't see you:

Check the dusk control setting to see if it is set to detect motion at all times or

only at night. Adjust if necessary.

Check that you are walking across the path of the sensor. It is more sensitive in

this direction than if you walk towards it.

More sensitive

Sensor

F F F F F or more help please visit www

or more help please visit www

or more help please visit www.x10.com/support

or more help please visit www

Specifications

Imager CMOS Sensor

Format 1/3"

Array Size NTSC: 510 X 492

Resolution: 310 TV Lines

Scanning: 2:1 Interlace

Auto Shutter: 1/60 to 1/15,000 sec.

Minimum Illumination: 3 LUX (f1.9)

Operating Temp.: 32 to 131 F

Humidity Limits 0 - 95%

Field of View: 38.5 deg.

Power Required: 120VAC

Less sensitive

Arrows denote

motion paths

.x10.com/support

Sensor