Table of Contents
Advertisement
4 Connect to a
home network
Before you connect the WAC7500 to a router:
•
Ensure that the PC meets the minimum
requirements.
You can choose one of these modes of
connection:
•
Wireless connection with automatic IP
address (see 'Create wireless connection
with automatic IP address' on page 11)
•
Wireless connection with static IP address
(see 'Create wireless connection with static
IP address' on page 11)
•
Wired connection with automatic IP
address (see 'Create wired connection
with automatic IP address' on page 1)
•
Wired connection with static IP address
(see 'Create wired connection with static
IP address' on page 1)
Create wireless connection
with automatic IP address
This is how to navigate and select with the
remote control:
•
Press or to select a menu option.
•
Press to confirm a selection.
•
Press to go back to the previous
screen.
•
Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
•
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
•
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
•
To delete the last character entry from the
display, press CLEAR .
11
EN
wac7500_um_01eng.indd 11
This chapter shows you how to create a
wireless connection to a home network
with automatic IP address.
1
Ensure that your network name and
network password or encryption key are
available.
•
Some Internet service providers (ISP)
require the use of a proxy server.
2
Turn on your wireless access point or
wireless router with broadband Internet.
3
Turn on the WAC7500.
4
On the WAC7500, press MENU .
5
Select [Settings] > [Network] >
[Wireless] and confirm.
6
Select the network from the list in the
display.
•
Enter encryption key (if required)
with the remote control, then press
OK to continue.
7
Select [Automatic] > (Apply settings?)
[Yes] and confirm.
The WAC7500 displays a confirmation
»
screen that the settings are saved.
Create wireless connection
with static IP address
This is how to navigate and select with the
remote control:
•
Press or to select a menu option.
•
Press to confirm a selection.
•
Press to go back to the previous
screen.
•
Press HOME to go to the Home menu.
The alphanumeric buttons of the remote
control are multi-function buttons:
•
To select a number or an alphanumeric
character, press a button once or more
until you see the number or alphabetic
character in the display of the WAC7500.
•
To cycle through the alphanumeric
characters that are available, press a button
repeatedly.
14-08-08 16:29:42
Hide quick links:
Advertisement
Table of Contents
