Citizen C650 Abbreviated User Manual

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications and operations, refer to the instruction manual:
Component identification
Hour hand
24-hour hand
Area name display
Power reserve
indication
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
(http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf)
Checking the power reserve
The poser reserve indication indicates the current power reserve.
• Indication example: C650/C651.
Level 3
Power reserve level
scale
Power reserve
is sufficient.
Meaning
Time setting warning function (only for C650)
Hands and the digital display warn the user as below to set the time correctly
when the watch is charged again after it stopped because of insufficient charge.
• Hands except mode hand: move to reference positions
• Area name display / digital display: blink
Adjust the time and calendar.
Setting the time of the digital section
• To set the time of the analog section, refer to "Switching the time of analog and
digital sections".
1.
Push the crown in to position
2.
Rotate the crown to move the mode hand to point [TME].
3.
Press and release the lower right button
button repeatedly to indicate an area name you want on the
B
area name display.
• For area names, refer to the table on "Using the world time".
4.
Pull the crown out to position
The second hand points 0 second and the summer time setting starts
blinking.
C650/C651/C652 Abbreviated instruction
UTC hour hand/ UTC minute
60
hand
Button
Minute hand
Crown
Digital display
Button
Crown's position
Mode hand
0 1 2
2 1
Power reserve is Power reserve is Insufficient
OK. getting low. charge warning
has started.
Charge immediately.
.
0
or upper right
A
.
2
C650/C651/C652 instruction manual
5.
Press and release the upper right button
change the target to be set.
• Each time you press button
Summer time
B
• The summer time setting does not appear when selecting "UTC".
6.
Adjust the target selected.
• Second: press button
A
• Minute/hour: rotate the crown. When you rotate the crown quickly, the
indication will change continuously. To stop the rapid change, rotate the
crown.
• 12/24-hour basis: press button
setting changes alternately between 12H and 24H.
"A" (AM) or "P" (PM) is indicated when selecting 12-hour basis.
7.
Repeat steps 5 and 6 to set other targets.
8.
Push the crown in to position
Setting the calendar
The calendar of this watch does not have to be adjusted manually until December
31, 2099 including leap years. (perpetual calendar)
1.
Push the crown in to position
2.
Rotate the crown to move the mode hand to point [CAL].
0
3.
Press and release the lower right button
button
B
area name display.
• For area names, refer to the table on "Using the world time".
4.
Pull the crown out to position
"Month" blinks on the digital display.
5.
Press and release the upper right button
change the target to be set.
• Each time you press button
6.
Rotate the crown to set the calendar.
• When you rotate the crown quickly, the indication will change continuously.
To stop the rapid change, rotate the crown.
7.
Repeat steps 5 and 6 to set other targets.
8.
Push the crown in to position
• The day of week is set automatically.
, the target changes as follows:
B
Second Minute
in accordance with a reliable time source
A
. Each time you press the button, the
A
to finish the procedure.
0
.
0
repeatedly to indicate an area name you want on the
.
2
, the target changes as follows:
B
Month Date
to finish the procedure.
0
repeatedly to
B
Hour 12/24-hour basis
or upper right
A
repeatedly to
B
Year
1/4